pelagia-kola2658
?>

Переведите текст vertical turning mills 1. the single-column vertical turning mills are universal high-speed machines. they are designed for roughing and finishing operations on parts made of steel, non-ferrous metals. 2. the machines are provided with two heads: vertical turret head and horizontal head. vertical turret head travels along the horizontal ways of the cross-rail. horizontal side head moves along the vertical ways of the column. 3. the machine performs the following operations: cylindrical turning, facing, cutting, drilling, etc. 4. high rigidity of machines and their units as well as the wide range of table speeds and work feeds allow machining at most favorable cutting speeds and work feeds. 5. motion to the table is transmitted from the main drive electric now by means of v-belts and gearbox. 6. for starting and stopping the table rotation the gearbox is provided with multidisc friction clutch.

Английский язык

Ответы

Kotvitskii
1. однорядные на вертикальные токарные мельницы являются универсальными высокоскоростные машины. Они предназначены для черновой и чистовой обработки деталей из стали, цветных металлов.2. Машины снабжены двумя головками: вертикальной головкой турели и горизонтальной головы. Вертикальная головка револьверная головка движется по горизонтальным путям поперечного рельса. Горизонтальная сторона головка перемещается вдоль вертикальных путей колонны.3. Машина выполняет следующие операции: цилиндрические точение, подрезку, резка, сверление и т.д.4. Высокая жесткость машин и их агрегатов, а также широком диапазоне скоростей стола и работы каналы позволяют обработку на самых выгодных скоростях резания и работа каналов.5. Движение к столу передается от электродвигателя главного привода в настоящее время с клиновых ремней и коробки передач.6. Для запуска и остановки вращения стола коробка передач снабжена многодисковый фрикционной муфтой.
АркадьевичБундин789
— you don't know that I smoke?

9. You are tasting the pizza over and over again. Is anything wrong? — Oh no, on the  contrary, it tastes so delicious that I just can’t help it.

10. Where is Mr. Brown? — He is having lunch at the canteen as usual. He usually  returns to his office at half past one.

11. I need your help immediately. There’s something wrong with my dog. He

has a temperature and he hardly breathes!

12. He is coming back from his business trip in a few days. you know it for sure? — Of course, I do. He always calls me every other day.

13. These shoes are too tight. — Then why are you putting them on again? — They  look so wonderful and besides they match my dress.

14. You are reading in the dark again! — But I don't believe it’s dark.  I see everything well enough.

15. Jack and Pam are having a long conversation. I wonder what they are talking about.

Объяснение:

mnogoz

если ты читаешь или пишешь ты не пишешь или не читаешь слово в() чтобы все было правильно ты должен все переписать все но без () тогда это задание окажется правильным

Объяснение:

If I to study, I to pass the exams.

If the sun to shine, we to walk into town.

If he to have a temperature, he to see the doctor.

If my friends to come, I to be very happy.

If she to earn a lot of money, she to fly to New York.

If we to travel to London, we to visit the museums.

If you to wear sandals in the mountains, you to slip on the rocks.

If Rita to forget her homework, the teacher to give her a low mark.

If they to go to the disco, they to listen to loud music.

If you to wait a minute, I to ask my parents.

вот так должен писать

Ответить на вопрос

Поделитесь своими знаниями, ответьте на вопрос:

Переведите текст vertical turning mills 1. the single-column vertical turning mills are universal high-speed machines. they are designed for roughing and finishing operations on parts made of steel, non-ferrous metals. 2. the machines are provided with two heads: vertical turret head and horizontal head. vertical turret head travels along the horizontal ways of the cross-rail. horizontal side head moves along the vertical ways of the column. 3. the machine performs the following operations: cylindrical turning, facing, cutting, drilling, etc. 4. high rigidity of machines and their units as well as the wide range of table speeds and work feeds allow machining at most favorable cutting speeds and work feeds. 5. motion to the table is transmitted from the main drive electric now by means of v-belts and gearbox. 6. for starting and stopping the table rotation the gearbox is provided with multidisc friction clutch.
Ваше имя (никнейм)*
Email*
Комментарий*

Популярные вопросы в разделе

taanaami75
inainainainaina0073
korj8
FATAHOVAMAINA
eliteclassic308
Rustamov741
tarasovs
ГегамБукреев830
Describe the room where jill is in now
Andei
Darialaza
boro-1973
Ирина
X2755070
targovich
Belik-elena20111