ksenyabobrovich7214
?>

1. найдите в правой колонке эквиваленты слов и словосочетаний: 1 engine lathe a. задняя бабка 2. turning b. фартук (суппорта) 3. drilling c. каретка 4. screw cutting d. передняя бабка 5. headstock e. сверление 6. tailstock f. токарно-винторезный станок 7.saddle g. нарезание винтов 8. lever h. рычаг 9. apron i. рукоятка 10. carriage j. суппорт 11. guideways k. обточка 12. handle l. направляющие (станка) 2. переведите на язык встречающиеся в тексте интерна¬циональные слова: metal, operation, principal, spindle, function, centre, control, base, special, bolt. 1. gearbox and headstock; 2. tailstock; 3. frame; 4. spindle; 5. feed gearbox; 6. electric motor; 7. control panel; 8. cross slide, 9. carriage; 10. tool block; 11. ways; 12. lead screw; 13. feed rod; 14. operating lever shaft; 15. operating and reverse handle; 16, apron; 17. hand feed wheel 3. простите текст и выполните следующие за ним : engine lathe 1. the engine lathe is the most commonly used machine-tool. it is used ; variety of metal operations, such as turning, drilling, screwcutting and many others. 2. the principal units of the lathe are the bed, the headstock, the tailstock and the carriage with the apron 3. the bed is the base of any machine-tool and it is made of grey iron on which the saddle and the tailstock slide along special guideways. the headstock is also located and bolted on the bed. 4. the headstock contains the spindle and the speed gearbox. the spindle is the part of the machine to which power is applied to rotate the work. the changing of the spindle speed is effected by levers. 5. the tailstock consists of a casting fitted to the bed. the function of the tailstock is to support one end of the work turned between centres and to mount the tools. 6. the carriage of the lathe, which carries the tool, is made up of two principal parts: the saddle and the apron. the saddle travels along the guideways of the bed. the apron represents the front wall of the carnage. on the front of the apron are mounted the handles and levers by which the actions of the tool are controlled. 4. переведите на язык в письменной форме абзацы 3, 4 и 5. 5. найдите соответствующие ответы на вопросы и напишите их в той последовательности, в которой заданы вопросы: вопросы 1. what operations is the engine lathe used for? 2. what are the principal units of the lathe? 3. what units are located on the bed? 4. what is the function of the tailstock? 5. where are the handles and levers mounted? ответы a. to support one end of the work turned between centres. b. on the front of the apron. c. for turning, drilling, screwcutting and others. d, .the headstock, the saddle and the tailstock. e. the bed, the headstock, the tailstock and the carriage with the apron. 6. закончите предложения, выбрав соответствующий вариант окончания: 1. the unit that contains the spindle and the gearbox is 2. the unit that supports one end of the work turned be¬tween centres is 3. the unit which carries the tool is called a) the carriage; b) the headstod c) the tailstock 4. the unit on saddle and the is called … a) the carriage b) the bed; c) the headstod 5. the units, actions of the tool are controlled, are a) guideways; b) the saddle and the apron; c) levers and handles.

Английский язык

Ответы

oskar-pn

задняя бабка -   tailstock

передняя бабка-headstock

lever -  рычаг 

engine lathe -  токарно-винторезный станок

drilling-сверление

saddle-суппорт

  handle-рукоятка

apron-фартук (суппорта)

carriage-каретка

guideways-направляющие (станка)

turning-обточка

  screw cutting-нарезание винтов

 

2. metal-металл

operation - операция, действие

principal - главный, основной

spindle - веретено, жердь

function - функция

centre - центр

control - , контроль

base- основание, подложка, подставка

special - особенный, специальный

bolt - засов, задвижка   

1. gearbox and headstock; - коробка передач и передняя бабка 

2. tailstock; - задняя бабка

  3. frame; - каркас, рама

4. spindle; - жердь,ось

5. feed gearbox; -коробка подач

6. electric motor; -электродвигатель

7. control panel; -панель

8. cross slide, - дословно поперечное скольжение (направляющая? )

9. carriage; - каретка

10. tool block; -   ?

11. ways; - направления, способы 

12. lead screw; -направляющий винт

13. feed rod; -  тяга механизма подачи,  ходовой валик

14. operating lever shaft; ?

15. operating and reverse handle; ?

16, apron; передник, фартук

17. hand feed wheel  маховичок ручной подачи

5)

  what operations is the engine lathe used for?

for turning, drilling, screwcutting and others

  what are the principal units of the lathe?

the bed, the headstock, the tailstock and the carriage with the apron

what units are located on the bed?

the headstock, the saddle and the tailstock

  what is the function of the tailstock?

  to support one end of the work turned between centres.

where are the handles and levers mounted?

  on the front of the apron

6)  1. the unit that contains the spindle and the gearbox is    the headstock

  2. the unit that supports one end of the work turned between centres is called  the tailstock

. 3. the unit which carries the tool is called    the carriage

  the units, actions of the tool are controlled, are called    levers and handles.

 

4)

the bed is the base of any machine-tool and it is made of grey iron on which the saddle and the tailstock slide along special guideways. the headstock is also located and bolted on the bed.

  постель - это основание любого станка и она сделана из серого литейного чугуна, на   котором вдоль специальных направляющих  скользят суппорт и  задняя бабка. передняя бабка также расположена и   скреплена болтами  к постели. 

4. the headstock contains the spindle and the speed gearbox. the spindle is the part of the machine to which power is applied to rotate the work. the changing of the spindle speed is effected by levers.

передняя бабка включает в себя  жердь(ось) и  коробку передач. жердь - это часть машины, к которой применяется  источник энергии(сила) для вращения. изменение скорости жерди осуществляется рычагами.

5. the tailstock consists of a casting fitted to the bed. the function of the tailstock is to support one end of the work turned between centres and to mount the tools.

 

задняя бабка состоит из  отливки, прилаженной к постели. функция постели заключается в поддержке одного конца изделия повернутым между центрами и закреплении инструментов.

nzaripova313
My name is ( своё имя) . i’m 13 ( свой возраст ) years old. i’ve been fond of cartoons from the very childhood and i still like watching some of them. i think, cartoons entertain us and keep us busy for some time, which is good for our parents. my parents also like cartoons. they sometimes watch them with me. my favourite cartoon is “tom and jerry”. it’s not too childish, so people of all ages can watch it. the main characters of this cartoon are the cat tom and the mouse jerry. each time tom sees jerry, he tries to catch him, but unsuccessfully. jerry is a little, smart mouse. he gets away with any prank. the reason, why i like this cartoon more than others, is its kind and funny plot. each time i watch it, it makes me smile and laugh, so good mood for the day is provided. when i was younger, i also watched “tom and jerry”. knowing that i’m fond of this cartoon, my mum often bought me various thematic items. for example, a plate or a t-shirt with tom and jerry picture. i can’t say i liked tom’s character more than jerry’s, or vice versa. i liked both these characters, as they were good in their own way. tom often gets in stupid situations while chasing a tricky mouse and that makes me feel sorry for him. jerry’s mission is not to get caught, because if he does, the cat will probably eat him. so, when i watch the series of this cartoon, i worry about both characters at the same extent. i’m sure i’m not the only child, who likes “tom and jerry”. millions of kids across the world watch this cartoon. due to its popularity, it has been translated into many languages
dimon198808744
От: rustam  кому : sam  тема: из алматы!   сэм за ваш адрес электронной почты о лондонской олимпиаде.  это звучит потрясающе. вам повезло, что вы получили билеты на 100-метровый финал, мне тоже повезло, потому что я отправился на зимние азиатские игры в 2011 году. я вам об этом рассказывал?   это случилось зимой, поэтому спорт отличался от летних игр. например, вы слышали о бандитах?   это немного похоже на хоккей на льду, но в каждой команде есть игроки, и они играют с небольшим красным шаром. многие события были в чимбулаке, примерно в 25 километрах от алматы.  другие события произошли в астане.  мой папа и я пошли посмотреть некоторые из лыжных событий.  когда мы приехали, мы не могли поверить, сколько там было людей.  услышал известие о том, что 2000 журналистов и 10 000 посетителей приехали из других стран, чтобы смотреть игры, невероятно!   казахстан отлично справился с лыжными соревнованиями, когда увидел, что мы выиграли золотую медаль в лыжном спорте для женщин и мужчин и две золотые медали на фристайле.  затем он выиграл еще две золотые медали на лыжах по пересеченной местности, так что всего шесть.  фактически, мы выиграли 70 медалей вместе, и мы подошли к таблице медалей: 32 золотые медали, 21 серебро и 17 бронзовых.  япония заняла второе место, а южная корея заняла третье место. что случилось с стадионами в лондоне, когда завершились олимпийские игры?   когда азиатские игры закончатся здесь, казахстанцы могут использовать стадионы и лыжные склоны.  я рад, потому что в этом году, в моей семье, и у меня есть праздник на горнолыжном курорте чимбулак, и у меня будут уроки катания на лыжах.  возможно, однажды, я буду соревноваться в азиатских играх.

Ответить на вопрос

Поделитесь своими знаниями, ответьте на вопрос:

1. найдите в правой колонке эквиваленты слов и словосочетаний: 1 engine lathe a. задняя бабка 2. turning b. фартук (суппорта) 3. drilling c. каретка 4. screw cutting d. передняя бабка 5. headstock e. сверление 6. tailstock f. токарно-винторезный станок 7.saddle g. нарезание винтов 8. lever h. рычаг 9. apron i. рукоятка 10. carriage j. суппорт 11. guideways k. обточка 12. handle l. направляющие (станка) 2. переведите на язык встречающиеся в тексте интерна¬циональные слова: metal, operation, principal, spindle, function, centre, control, base, special, bolt. 1. gearbox and headstock; 2. tailstock; 3. frame; 4. spindle; 5. feed gearbox; 6. electric motor; 7. control panel; 8. cross slide, 9. carriage; 10. tool block; 11. ways; 12. lead screw; 13. feed rod; 14. operating lever shaft; 15. operating and reverse handle; 16, apron; 17. hand feed wheel 3. простите текст и выполните следующие за ним : engine lathe 1. the engine lathe is the most commonly used machine-tool. it is used ; variety of metal operations, such as turning, drilling, screwcutting and many others. 2. the principal units of the lathe are the bed, the headstock, the tailstock and the carriage with the apron 3. the bed is the base of any machine-tool and it is made of grey iron on which the saddle and the tailstock slide along special guideways. the headstock is also located and bolted on the bed. 4. the headstock contains the spindle and the speed gearbox. the spindle is the part of the machine to which power is applied to rotate the work. the changing of the spindle speed is effected by levers. 5. the tailstock consists of a casting fitted to the bed. the function of the tailstock is to support one end of the work turned between centres and to mount the tools. 6. the carriage of the lathe, which carries the tool, is made up of two principal parts: the saddle and the apron. the saddle travels along the guideways of the bed. the apron represents the front wall of the carnage. on the front of the apron are mounted the handles and levers by which the actions of the tool are controlled. 4. переведите на язык в письменной форме абзацы 3, 4 и 5. 5. найдите соответствующие ответы на вопросы и напишите их в той последовательности, в которой заданы вопросы: вопросы 1. what operations is the engine lathe used for? 2. what are the principal units of the lathe? 3. what units are located on the bed? 4. what is the function of the tailstock? 5. where are the handles and levers mounted? ответы a. to support one end of the work turned between centres. b. on the front of the apron. c. for turning, drilling, screwcutting and others. d, .the headstock, the saddle and the tailstock. e. the bed, the headstock, the tailstock and the carriage with the apron. 6. закончите предложения, выбрав соответствующий вариант окончания: 1. the unit that contains the spindle and the gearbox is 2. the unit that supports one end of the work turned be¬tween centres is 3. the unit which carries the tool is called a) the carriage; b) the headstod c) the tailstock 4. the unit on saddle and the is called … a) the carriage b) the bed; c) the headstod 5. the units, actions of the tool are controlled, are a) guideways; b) the saddle and the apron; c) levers and handles.
Ваше имя (никнейм)*
Email*
Комментарий*

Популярные вопросы в разделе

annabanova9
orb-barmanager
AlekseiBunina1895
yamalsva45
alina-bas
Segyn1218
Григорьевич915
galinasemyan689
Kozloff-ra20146795
Lazar
Андрей Анна22
chapaevval
Олимов Протопопова
А) look at the map. which continents can you see?
lavr74
vikola2008