Мельникова
?>

с английским Тема урока: «Использование информационных технологий в профессиональной деятельности». 1. Прочитайте текст и выполните задания после него письменно. Numerical control is the automatic control of the machine using a computer and a processing program. Previously, the machine was controlled mechanically. CNC machines are similar to universal machines.In the CNC rack, the part processing is programmed in the programming language. Todaypopular is programming in G-and M-codes. Consider the process of training students who is trained in the profession of "CNC lathe Operator". The College uses ICT technologies in laboratory and practical classes – this is a simulator of SinuTrain 4.5.in this application, students learn to write programs using both G - and M-codes. This simulator facilitates the process of training future turners. The teacher projects an image from his laptop onto the blackboard from the projector, where he shows the process of writing a program in the SinuTrain 4.5 simulator. Students also sit at their laptops in this simulator. They repeat the writing of the program for the teacher. And later, having mastered the G-and M-codes, they program themselves. One of the main advantages of using these ICT technologies is that the simulator can simulate the process of processing a part according to a program written by a student, where he can see what part he eventually got. 2. Верны ли эти утверждения (True/false): 1) Numerical control isn`t the automatic control. 2) CNC machines are similar to universal machines. 3) ICT technologies in laboratory and practical classes aren`t used in the colleges. 4) Turners learn to write programs. 5) Students learn to write programs using both G - and N-codes. 6) Having mastered the G-and M-codes, teachers program themselves. 7) One of the main disadvantages of using these ICT technologies is that the simulator can simulate the process. 3. ответьте на во Выпишите из первого абзаца сказуемые, из второго- подлежащие, из третьего- местоимения, из четвертого- прилагательные.

Английский язык

Ответы

zelreiki
- Look! Now we have a big house. We have four bedrooms, a dining room, a living room and a kitchen. Ally and I have our own rooms.
- The house is really big! (1) Have you bought any new furniture?
- Yes, our parents (2) have already bought this beautiful dining table. Today we will have dinner together here and mum (3) has already sewn new curtains.
Oh, the room is really beautiful. Can you show me my room?
- Of course, we can. It is next to my room. Mum (4) has just redecorated it
- (5) Has she put a new carpet on the floor? 
- Yes, she has. And she (6) has made this lamp.
-It is very cosy here.
(7) Have you seen the flowers in the garden?
- Yes, I have. (8) Do you help your Dad with the flowers?
- Yes, I do. I always help him in the garden. We (9) have planted these flowers together.
- Good girl !
sunrise
My aunt was very depressed last Sunday. The weather was terrible. It was cold and rainy. He hasband wasn't at home. He was at the hospital because he was sick. Her children weren't at school. They weren't in the yard, they were in the living room. The TV was broken. The children weren't only upset, they were very angry. The neighborbours weren't happy because their children were too noisy.
The house was not clean. The sink was broken. There were dirty dishes on the kitchen table and in the sink. There was nothing in the fridge. There were no vegetables for dinner, there was no juice for her children. There wasn't even bread in the house! She was tired and hungry. She was just exhausted.

Ответить на вопрос

Поделитесь своими знаниями, ответьте на вопрос:

с английским Тема урока: «Использование информационных технологий в профессиональной деятельности». 1. Прочитайте текст и выполните задания после него письменно. Numerical control is the automatic control of the machine using a computer and a processing program. Previously, the machine was controlled mechanically. CNC machines are similar to universal machines.In the CNC rack, the part processing is programmed in the programming language. Todaypopular is programming in G-and M-codes. Consider the process of training students who is trained in the profession of "CNC lathe Operator". The College uses ICT technologies in laboratory and practical classes – this is a simulator of SinuTrain 4.5.in this application, students learn to write programs using both G - and M-codes. This simulator facilitates the process of training future turners. The teacher projects an image from his laptop onto the blackboard from the projector, where he shows the process of writing a program in the SinuTrain 4.5 simulator. Students also sit at their laptops in this simulator. They repeat the writing of the program for the teacher. And later, having mastered the G-and M-codes, they program themselves. One of the main advantages of using these ICT technologies is that the simulator can simulate the process of processing a part according to a program written by a student, where he can see what part he eventually got. 2. Верны ли эти утверждения (True/false): 1) Numerical control isn`t the automatic control. 2) CNC machines are similar to universal machines. 3) ICT technologies in laboratory and practical classes aren`t used in the colleges. 4) Turners learn to write programs. 5) Students learn to write programs using both G - and N-codes. 6) Having mastered the G-and M-codes, teachers program themselves. 7) One of the main disadvantages of using these ICT technologies is that the simulator can simulate the process. 3. ответьте на во Выпишите из первого абзаца сказуемые, из второго- подлежащие, из третьего- местоимения, из четвертого- прилагательные.
Ваше имя (никнейм)*
Email*
Комментарий*

Популярные вопросы в разделе

Алена-Петрова285
Natacha3636672
Бегун-Марина
Serdechnaya636
Федорович Шахова241
Кристина_Memmedov
natapetrova20017
magichands68
DVOct33
charlie79
kronid12
olesya-kwas
Анатольевич
Bella
nsmmkrtchyan